Dell PowerEdge C8000 - Manual (Page 146)

146 Using the System Setup Program
Table 2-16. Command Forwarding Commands (NetFn: 0x0CH)
Command NetFn Code IPMI2.0 BMC
Forwarded Command Transport 0x30h O Yes
Set Forwarded Commands Transport 0x31h O Yes
Get Forwarded Commands Transport 0x32h O Yes
Enable Forwarded Commands Transport 0x33h O Yes
Table 2-17. Firmware Update Commands (NetFn: 0x08H)
Command NetFn Code IPMI2.0 BMC
Firmware Update Phase 1 Firmware 0x10h O Yes
Firmware Update Phase 2 Firmware 0x11h O Yes
Get Firmware Update Status Firmware 0x12h O Yes
Get Firmware Version Firmware 0x13h O Yes
Set Firmware Update Status Firmware 0x16h O Yes
Firmware Update Phase 3 Firmware 0x21h O Yes
Table 2-18. GPGPU Setting Commands (NetFn: 0x30H)
Command NetFn LUN CMD Privelege
Set GPGPU ID 0x30h 0h 32h Admin
Get GPGPU ID 0x30h 0h 33h Admin
Table 2-19. Fresh Air Mode Setting Commands (NetFn: 0x30H)
Command NetFn CMD O/M Supported
Enable Fresh Air Mode Firmware 43h O Yes
Get Fresh Air Status Firmware 44h O Yes
Disable Fresh Air Mode Firmware 43h O Yes