Dell PowerEdge C8000 - Manual (Page 137)

Using the System Setup Program 137
4B00h Prevent Back-
flash
When enabled, will prohibit the system BIOS to
downgrade to version 2.1.0 or earlier version.
NOTE: You will not be able to change the setting once
the feature is enabled.
4B01h Prevent Back-
flash
By default, this feature is set to disabled for the
compliance of updating the system BIOS. This token
works with the password jumper when the jumper is
set to enabled. When the setting is disabled, the
system BIOS can be updated to any revision that
contains a valid digital signature.
4961h PCIe Slot5 Allows you to electrically disable PCIe slot5.
4962h PCIe Slot5 Allows you to electrically enable PCIe slot5 and option
ROM initialization.
4964h PCIe Slot6 Allows you to electrically disable PCIe slot6.
4965h PCIe Slot6 Allows you to electrically enable PCIe slot6 and option
ROM initialization.
4963h PCIe Slot5 Enables the PCIe slot5 without executing the option
ROM initialization.
4966h PCIe Slot6 Enables the PCIe slot6 without executing the option
ROM initialization.
Table 2-1. D4 Token Table (continued)
Token Setup Option Description