Dell PowerEdge C8000 - Manual (Page 233)

Installing System Components 233
6 Remove the back NVIDIA Tesla K10 GPGPU card.
a Release the emergency throttling cable from the retaining clips on the
air baffle. See Figure 3-63.
b Remove the two screws securing the air baffle. See Figure 3-63.
c Lift the air baffle from the sled cover. See Figure 3-63.
d Release the power cables from the retaining clips along the inside wall
of the sled cover. See Figure 3-63.
Figure 3-63. Removing and Installing the Air Baffle
1 left air baffle 2 M3 screws (2)
3 power cables 4 retaining clips (3)
5 emergency throttling cable
1
2
3
4
5