Dell PowerEdge C8000 - Manual (Page 29)

About Your System 29
* This condition is not supported in LSI HBA/RAID cards. When you abort the RAID rebuild process,
the hard-drive LED blinks amber to indicate drive failure.
This LED pattern is not applicable for the non-RAID mode of onboard SATA, for example, without Intel
RSTe drivers.
Power and System Board Indicator Codes
The indicators on the front of the sled display status codes during system
startup. For location of the indicators on the front panel, see Figure 1-1.
Predicted drive failure (SMART) On 500 ms
Off 500 ms
Off 1000 ms Off 500 ms
On 500 ms
Off 1000 ms
Drive rebuilding aborted* On 3000 ms
Off 9000 ms Off 6000 ms
On 3000 ms
Off 3000 ms
Table 1-1. Power and System Board Indicator Codes
Indicator Color Status Indicator Code
Power-on
indicator
Green Solid
Sled power is on (S0)
Amber Off
Green Solid BMC critical condition event in power off
mode (S4/S5)
Amber Blinking
Green Off BMC critical condition event in power on
mode (S0)
Amber Blinking
System
identification
indicator
Blue Solid The IPMI via Chassis Identify Command On
or ID Button Press ID On is generated
Blue Blinking Only the IPMI via Chassis Identify Command
Blink On is generated
Off The IPMI via Chassis Identify Command Off
or ID Button Press ID Off is generated
Condition (continued) Hard-Drive LEDs
(HDD0 to HDD7)
Green LED Amber LED