Dell PowerEdge C8000 - Manual (Page 173)

Installing System Components 173
Figure 3-21. Removing and Installing the Hard-Drive Tray
Installing the Hard-Drive Tray
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 Insert the sled tray’s standoff holes into the sled tray standoffs.
See Figure 3-21.
2 Replace the three screws securing the hard-drive tray. See Figure 3-21.
3 Replace the hard-drives. See "Installing a Hard-Drive Carrier on the Sled
Tray" on page 170.
4 Close the sled. See "Installing the Front and Back Sled Covers" on
page 180 or "Installing the Sled Cover" on page 184.
5 Replace the sled. See "Installing a Sled" on page 156.
1 M3 screws (3) 2 hard-drive tray
3 hard-drive tray standoff holes (2)
1
2
3