Dell PowerEdge C8000 - Manual (Page 122)

122 Using the System Setup Program
02A1 C1E State Enables the processor Enhanced Halt (C1E) state.
(default)
02A2 C1E State Disables the processor C1-E state. Do at your own
risk.
02A9 DRAM Prefetcher Disables DRAM references from triggering DRAM
prefetch requests.
02AA DRAM Prefetcher Turns on the DRAM prefetch unit in the Northbridge.
02AB HW Prefetch
Training on SW
Disables hardware prefetcher from considering
software prefetches when detecting strides for
prefetch requests.
02AC HW Prefetch
Training on SW
Enables Hardware prefetcher considers software
prefetches when detecting strides for prefetch
requests. (default)
02AD SR-IOV Global
Enable
Enables BIOS support for SRIOV devices.
02AE SR-IOV Global
Enable
Disables BIOS support for SRIOV devices.
02B6 Memory
Operating Voltage
Indicates all DIMMs in the system are operating at 1.5
volts.
02B7 Memory
Operating Voltage
Indicates all DIMMs in the system are operating at
1.35 volts.
02B8 Memory
Operating Voltage
If set to Auto, the memory operating voltage will be
set automatically by the Memory initialization code
and depending upon the installed DIMM's capability
and the memory configuration of the system. This
setting automatically sets the memory operating
voltage according to the memory detected. (default)
02C5 DCU Streamer
Prefetcher
Enables the DCU Streamer Prefetcher. (default)
02C6 DCU Streamer
Prefetcher
Disables the DCU Streamer Prefetcher.
02C7 Data Reuse
Optimization
Sets to enable for HPC applications. (default)
Table 2-1. D4 Token Table (continued)
Token Setup Option Description