beautypg.com

Installing the sled cover, Figure 3-29 – Dell PowerEdge C8000 User Manual

Page 184

background image

184

Installing System Components

Figure 3-29. Removing and Installing the Twin Axial Cable

Installing the Sled Cover

NOTE:

It is recommended that you always use a static mat and static strap while

working on components in the interior of the system.

1 Connect the twin axial cable.

a

Connect the twin axial cable to the system board. See Figure 3-29.

NOTE:

As you connect the twin axial cable to the connector on the system board,

keep them evenly aligned to avoid bending any connector pins.
b

Replace the screw securing the twin axial cable to the system board.

See Figure 3-29.

1

twin axial cable screw (1)

2

twin axial cable

See also other documents in the category Dell Computer hardware: