Dell PowerEdge C8000 - Manual (Page 347)

Troubleshooting 347
9 Close the sled. See "Installing the Front and Back Sled Covers" on
page 180 or "Installing the Sled Cover" on page 184.
10 Reinstall the sled into the enclosure. See "Installing a Sled" on page 156.
11 Turn on the sled and attached peripherals.
12 If the problem persists, turn off the sled and attached peripherals.
13 Remove the sled from the enclosure. See "Removing a Sled" on page 155.
14 Open the sled. See "Removing the Front and Back Sled Covers" on
page 176 or "Removing the Sled Cover" on page 181.
15 Remove the cooling shroud. See "Removing the Cooling Shroud" on
page 278.
16 Remove processor 2. See "Removing a Processor" on page 285.
17 Replace the cooling shroud. See "Installing the Cooling Shroud" on
page 279.
18 Close the sled. See "Installing the Front and Back Sled Covers" on
page 180 or "Installing the Sled Cover" on page 184.
19 Reinstall the sled into the enclosure. See "Installing a Sled" on page 156.
20 Turn on the sled and attached peripherals.
If the problem persists, the processor is faulty. See "Getting Help" on
page 377.
21 Turn off the sled and attached peripherals.
22 Remove the sled from the enclosure. See "Removing a Sled" on page 155.
23 Open the sled. See "Removing the Front and Back Sled Covers" on
page 176 or "Removing the Sled Cover" on page 181.
24 Remove the cooling shroud. See "Removing the Cooling Shroud" on
page 278.
25 Replace processor 1 with processor 2. See "Installing a Processor" on
page 287.
26 Close the sled. See "Installing the Front and Back Sled Covers" on
page 180 or "Installing the Sled Cover" on page 184.
27 Repeat step 16 through step 10.
If you have tested both the processors and the problem persists, the system
board is faulty. See "Getting Help" on page 377.