Installing the microsd card reader support bracket, Installing the microsd card reader, Support bracket – Dell PowerEdge C8000 User Manual
Page 312
312
Installing System Components
Installing the MicroSD Card Reader Support Bracket
CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 Align the MicroSD card reader support bracket with the screw holes on the
sled tray. See Figure 3-116.
2 Replace the two screws securing the MicroSD card reader support bracket.
3 Replace the MicroSD card reader. See "Installing the MicroSD Card
4 If applicable, replace the mezzanine card. See "Installing the SAS
Mezzanine Card" on page 299, "Installing the Infiniband Mezzanine Card"
on page 303, or "Installing the 10 GbE Mezzanine Card" on page 306.
5 If applicable, replace the RAID battery. See "Installing the MegaRAID SAS
9285CV-8e RAID Battery" on page 206.
6 Close the sled. See "Installing the Front and Back Sled Covers" on
page 180 or "Installing the Sled Cover" on page 184.
7 Replace the sled. See "Installing a Sled" on page 156.