Dell PowerVault MD3820f - Manual (Page 83)

To change the virtual disk modification priority:
1. In the AMW, select the Storage & Copy Services tab.
2. Select a virtual disk.
3. In the menu bar, select Storage → Virtual Disk → Change → Modification Priority.
The Change Modification Priority window is displayed.
4. Select one or more virtual disks. Move the Select modification priority slider bar to the desired
priority.
NOTE: To select nonadjacent virtual disks, press click and select the appropriate virtual
disks. To select adjacent virtual disks, press click the appropriate virtual disks. To select
all of the available virtual disks, click Select All.
5. Click OK.
A message prompts you to confirm the change in the virtual disk modification priority.
6. Click Yes.
7. Click OK.
Changing The Virtual Disk Cache Settings
You can specify the cache memory settings for a single virtual disk or for multiple virtual disks in a storage
array.
Guidelines to change cache settings for a virtual disk:
• After opening the Change Cache Settings dialog, the system may display a window indicating that the
RAID controller module has temporarily suspended caching operations. This action may occur when a
new battery is charging, when a RAID controller module has been removed, or if a mismatch in cache
sizes has been detected by the RAID controller module. After the condition has cleared, the cache
properties selected in the dialog become active. If the selected cache properties do not become
active, contact your Technical Support representative.
• If you select more than one virtual disk, the cache settings default to no settings selected. The current
cache settings appear only if you select a single virtual disk.
• If you change the cache settings by using this option, the priority of all of the virtual disks that you
selected is modified.
To change the virtual disk cache settings:
1. In the AMW, select the Storage & Copy Services tab and select a virtual disk.
2. In the menu bar, select Storage → Virtual Disk → Change → Cache Settings.
The Change Cache Settings window is displayed.
3. Select one or more virtual disks.
To select nonadjacent virtual disks, press click. To select adjacent virtual disks, press
click. To select all of the available virtual disks, select Select All.
83