ClearOne Converge 590 - Manual (Page 61)

Using the Converge 61
CONFIGURATION
The configuration menu provides options for selecting countries, languages and RF (for
wireless units) as well as configuring the Flash setting.
To select a Country
1. Press to access the menu options.
2. Scroll to Configuration and press .
3. Press again to select Country.
4. Select the country where the Converge is
being used from the list of available
countries.
5. Press to save the country selection and return to the Configuration menu.
> Note: This is assigned to the telco for the specific country settings.
Warning: The country code must be set correctly in RAV-Ware and the Controller to
ensure that the unit operates properly when connected to the telco network and that it
complies with the country’s telco requirements. Changing this code to a country other
than the intended country of operation might cause the Converge to be non-
compliant.
To select a Language
1. Press to access the menu options.
2. Scroll to Configuration and press .
3. Scroll to Language and press .
4. Select a language from the list.
5. Press to save the language and
return to the Configuration menu.
USA/Canada
Europe
Australia/New Zealand
*
Select a country
English
Spanish
French *
Select a language