ClearOne Converge 590 - Manual (Page 43)

RAV-Ware Software Configuration 43
ADJUSTING LINE INPUT/OUTPUT SETTINGS
If your device is not listed in the Device Toolbox you can manually customize and config-
ure the audio of your auxiliary devices in the Line Input and Line Output windows. Line
input and output devices include video codecs, CD players, amplifiers and sound cards.
To access Line Input Settings
1. Open the Line Input window by clicking on the
Line IInput device icon. The Line Input dialog box
appears.
To adjust Line Input Equalization
1. Adjust the the Low, Mid and High frequency
tones using the Equalization sliders.
To enable Line Input Mute
1. Click the Mute button. The Mute
indicator will turn red when Mute is enabled.
To adjust Line Input Audio Level (Volume)
1. Using the slider, adjust the volume. The meter
will display output levels.
> Note: To save the name and setting of your line input device, refer to the Device
Toolbox Editor on page 54.
To access Line Output settings
1. Open the Line Output window by clicking on the
Line O Output device icon.The Line Output dialog box
appears.
To adjust Line Output Equalization
1. Adjust the the Low, Mid and High frequency
tones using the Equalization sliders.
To enable Line Output Mute
1. Click the Mute button. The Mute
indicator will turn red when Mute is enabled.