ClearOne Converge 590 - Manual (Page 51)

RAV-Ware Software Configuration 51
ADVANCED FEATURES
RAV-Ware has several advanced features which allow you to perform system checks
and administrative functions.
SYSTEM CHECKS
The System Diagnostics window allows you to check your Converge system to be sure all
components of your system are connected and working properly.
To open System Checks
1. Click the System C Checks button or select System C Checks from the Tools menu.
> Note: This option is only available when you are connected to a Converge unit.
To run System Checks
1. Click the START button. If you are
local (in the same room as the
loudspeakers), you will hear a tone
as the Converge checks all compo-
nents. When the check is complete,
lights will indicate the status of each
component. Green indicates the
component is connected and
functioning. Red indicates a problem
with the component.
(Converge 560 shown)