ClearOne Converge 590 - Manual (Page 52)

52 Technical Services: 800.283.5936
EVENT LOG
The Event Log keeps record of a user-selectable events. You select which events you want
recorded and RAV-Ware keeps a log, allowing you to periodically review events and make
sure the system is running smoothly. You can also save the Event Log as a .txt file. Check
the Event Log when there are communication errors or for other troubleshooting.
To open the Event Log
1. Click the Event LLog toolbar button or select Event LLog from the
Tools menu.
To track events
1. Select the events you
would like to log.
To save an Event Log
1. Click the Save button.
2. Name the file.
3. Click Save. The log is
saved as a .txt file.
To print an Event Log
1. Click the Print button.
2. Select the printer.
3. Click Print.
Function
Logs when telco was enabled and disabled.
Selection
Logs DSP communication errors only.
Logs how long each call lasts.
Logs every time the Converge system reboots.
Logs when system checks are performed and the results of the checks.
Logs battery level as reported by the RF Controller (wireless units only).
Logs dialed numbers.
Default
Reboot
Errors
Password
Telco
Dialing
Call Duration
System Check
Battery Life
Logs when the mixer settings are defaulted.
Logs failed and successful access through TCP/IP or web interface.
FIGURE 3.15 Event logs