ClearOne Converge 590 - Manual (Page 39)

RAV-Ware Software Configuration 39
LOUDSPEAKERS
You can adjust your loudspeaker equalization, change volume levels and enable
ClearEffect in the Loudspeaker window. Equalization in RAV-Ware is similar to the bass
and treble adjustments on a stereo. Increasing or decreasing the low, mid and high
frequencies and levels allows you to customize loudspeaker audio and provide the optimal
listening experience for your users.
To access Loudspeaker settings
1. Click the Loudspeaker icon in the configuration screen.
The Loudspeaker settings dialog box appears.
To enable ClearEffect
When ClearEffect is enabled, it causes the
audio coming from the telephone line to
emulate wideband audio. It does this by
adding high and low frequencies to the
audio signal, creating a fuller sound.
1. Click the ClearEffect O Off/On button. The
indicator will turn green when
ClearEffect is enabled.
To adjust Equalization
1. Adjust the the Low, Mid and High fre-
quency tones using the Equalization sliders.
To enable Mute
1. Click the Mute button. The Mute
indicator will turn red when Mute is
enabled.
To adjust audio level (Volume)
1. Using the slider, adjust the volume. The meter will display output levels.
2. Click Close to save the settings.