ClearOne Converge 590 - Manual (Page 57)

Using the Converge 57
TO SEND A FLASH SIGNAL
1. Press to use call transfer, call waiting, or conference calling.
> Note: This feature is dependent on your PBX service or local phone service. Refer to
your PBX vendor or local telephone service for details.
TO ADJUST THE SPEAKER VOLUME
1. Press to increase the volume.
2. Press to decrease the volume.
> Note: If an external amplifier is dragged to the line output or record output in
RAV-Ware, the volume buttons will be programmed to adjust the external amplifier.
See page 41 for more information.
PROGRAMMING PHONE PREFERENCES
You can manage the Phonebook, adjust phone settings, such as ring melody and tone,
and set preferences, such as country codes and language, through the menu options out-
lined below. You can also program these preferences in the RAV-Ware software. Refer to
Chapter 3 for more information on RAV-Ware.
Menu
Phonebook Settings Configuration
Delete
Edit
Add
Auto Disconnect
Auto Answer
Ringer Level
Ring Melody
Select Language
Select Frequency
Flash Duration
Select Country
RF Radio Test
LCD Contrast
IP Address
Version
Wired Control
FIGURE 4.1 Menu tree