ClearOne Converge 590 - Manual (Page 33)

RAV-Ware Software Configuration 33
BREAKOUT BOX LEVEL TAB
From this tab (see figure 3.6), you can view the make and model of the mic that has been
dragged and dropped from the device toolbox onto the specific microphone connection of
the breakout box. You can determine if a mic is gated on or muted by the Gating indicator
being green or red, respectively. You can set the coarse gain and fine gain for the micro-
phone channel, and read the post gain meter. You can also enable/disable automatic level
control (ALC) settings, enable/disable mute, and enable/disable phantom power.
To adjust Coarse Gain
The Coarse Gain sets the analog gain for the microphone channel.
1. Using the slider, adjust the coarse gain for the microphone channel. The meter will
display levels, when enabled. Enable the meter by clicking the check box.
To adjust Fine Gain
The Fine Gain sets the fine gain for the microphone channel. The Fine Gain allows you to set
the gain limits more precisely than with the coarse gain control.
1. Using the slider, adjust the fine gain for the microphone channel. The meter will
display levels, when enabled. Enable the meter by clicking the check box.
To enable ALC
ALC automatically adjusts microphone levels to ensure participants’ voices are
transmitted at consistent levels regardless of whether people are speaking loudly or softly.
1. Click the ALC button. The indicator will turn green when ALC is enabled.
To enable Mute
1. Click the Mute button. The Mute indicator will turn red and the Gate indicator next to
“Connected to:” will also turn red when Mute is enabled.
To enable Phantom Power
Phantom power is an auxiliary power source to power certain types of microphones. The
phantom voltage is 24VDC.
1. Click the Phantom P Power button. The indicator will turn green when Phantom Power is
enabled.
BREAKOUT BOX PROCESSING TAB
Click on the Processing tab from the Microphone Settings screen to access microphone
processing features. You can enable/disable acoustic echo cancellation (AEC), set the
NLP (non-linear processing level), enable/disable noise cancellation, adjust the
cancellation depth, enable/disable speech lift, adjust speech level, and set the filter from
this tab (see figure 3.7).