ClearOne Converge 590 - Manual (Page 26)

26 Technical Services: 800.283.5936
RAV-WARE FILES
You can save current RAV-Ware files, create new files, edit existing files, and import files
using the menus and toolbar icons. When connected to a Converge unit, any changes
made to a RAV-Ware file are updated immediately within the Converge unit. The file must
be saved to remain permanent within the RAV-Ware file.
TO SAVE A FILE
1. From the File menu, select Save FFile or click the Save FFile icon
on the toolbar.
2. Browse to the desired location and enter the name of the file.
3. Click Save.
> Tip: You can right-click on the configuration window and select
Save FFile to save your file. You can also select Save FFile A As to
rename and save the file you are working on.
TO CREATE A NEW FILE
1. Click the New FFile toolbar icon or select New FFile from the File menu.
2. Select either the Converge 560 or Converge 590 depending on your
system.This will open the Configuration Screen where you can set
user preferences for your Converge system.
3. Click Save.
TO EDIT AN EXISTING FILE
1. Click the Edit FFile toolbar button or select Edit FFile from the File menu.
2. Locate and select the file you want to edit.
3. Click Open.
4. Make the desired changes to the file.
5. Click Save.
> Note: The changes only take effect after they have been imported to a connected
Converge system.
TO EDIT AN EXISTING FILE
1. Connect to a Converge unit.
2. From the File menu, select Import.
3. Choose your Converge file.
4. Click Open. The Converge unit reboots and updates with all the
file changes.
> Tip: You can also right-click on the configuration window and
select Import to import a saved Converge file.