ClearOne Converge 590 - Manual (Page 19)

Connecting the Converge 19
CONNECTING VCRS AND DVD PLAYERS
You can record your audio/video conference or play audio using a playback device such
as a VCR or DVD player.
To connect to record/playback
1. For recording, connect the Left and Right Audio Out on the Converge to the left and
right audio in on the VCR or DVD player.
2. For playback, connect the Left and Right Audio In on the Converge to the left and
right audio out on the VCR or DVD player.
> Note: You can also connect a mono-signal device or a non-record/playback device to
these line in/out connectors.
CONNECTING PTZ CAMERAS
The Converge system provides voice-tracking capabilities through VISCA control port con-
nection to a Pan, Tilt, Zoom camera. Voice Tracking allows the camera to move to preset
positions based on microphone activation. For instructions on programming the presets,
see page 47.
To add a camera
1. Connect the camera to the Camera C Control port on the mixer.
> Note: The camera video out signal connects to a video codec.
PLAYBACK / RECORD
L
R
L
R
IN OUT
FIGURE 2.16 Connecting a record/playback device
CAMERA
CONTROL
FIGURE 2.17 Connecting a camera