ClearOne Converge 590 - Manual (Page 27)

RAV-Ware Software Configuration 27
NETWORK FIND
Network Find allows you to connect to any Converge system on another subnetwork or
network using its IP address or a unique network name. Use Network Find to access
Converge units not listed in the Connections pane, but which reside on a different subnet-
work or network.
TO OPEN THE NETWORK FIND
1. Click the Network FFind icon on the toolbar.
TO CONNECT TO A SYSTEM ON THE NETWORK
1. Enter the IP aaddress or name of the Converge system
to which you want to connect.
2. Click OK.
3. You will see a password prompt window. Enter the User nname
and Password of the networked system. The default user name
is ClearOne and the default password is RAV.
4. Click OK. The system icon will appear in the Connection list and
the Configuration screen will open.
> Note: Once you have connected to a Converge unit using
Network Find, a shortcut connection icon for that unit will display
as long as RAV-Ware can find the unit on the network. If
RAV-Ware cannot find the unit, the shortcut icon will be removed.