ClearOne Converge 590 - Manual (Page 49)

RAV-Ware Software Configuration 49
DIALER
While most calls will be made using the controller, you can also manage all your calls from
the Dialer in RAV-Ware. You can dial a number, redial the last dialed call and
disconnect calls. You can also use flash settings, mute the microphones and adjust
loudspeaker volume.
To open the Dialer
1. Click the Phonebook E Edit button on the
toolbar or select Phonebook E Edit from the
Tools menu. The Dialer window appears (see
figure 3.14).
> Note: This option is only available when you
are connected to a Converge unit.
To make a call
1. Click the ON/OFF button.
2. Dial the number as you would on a standard phone. The number appears at the top
of the display window.
> Note: You can also pre-dial the number and press the ON/OFF button to connect the
call.
> Tip: You can also dial using the 0-9, star (*) and number (#) on your keyboard. Use
the comma (,) key to enter a two second pause. The Enter key connects to and dis-
connects from the telephone line.
FIGURE 3.14 Dialer window