ClearOne Converge 590 - Manual (Page 38)

38 Technical Services: 800.283.5936
To set Hold Time
Adjust hold time allows you to set how long the channel stays gated on after the mic gates
off (see figure 3.10).
1. Using the slider, adjust the hold time to the desired level.
To adjust Off Attenuation
Adjust off attenuation allows you to set the amount of level reduction applied to a mic
when it is gated off.
1. Using the slider, adjust the off attenuation of the microphone to the desired level.
To adjust Decay Rate
Set decay rate allows you to set how quickly a mic gates off after the hold time expires.
1. Click the Decay R Rate radio button for the desired amount of decay after the gate is
lost.
To enable Chairman Override
Chairman override provides gating priority for a mic. When a mic with chairman
override enabled gates on, all mics that don't have chairman override enabled will gate off.
1. Click the Chairman O Override radio button enable the chairman override feature.
FIGURE 3.10 Converge 560/590 automixing gate functions