ClearOne Converge 590 - Manual (Page 44)

44 Technical Services: 800.283.5936
To adjust Line Output Audio Level (Volume)
1. Using the slider, adjust the volume. The meter will display output levels.
> Note: To save the name and setting of your line output device, refer to the Device
Toolbox Editor on page 54.
RECORD AND PLAYBACK
Record and Playback devices include VCRs, DVD players and sound cards. However, the
Playback/Record jacks are line level inputs and outputs and are not restricted to these
devices. You can use devices that have preconfigured audio settings from the Device
Toolbox or you can manually set the audio settings for your VCRs or DVD players.
PRECONFIGURED RECORD/PLAYBACK DEVICES
The audio settings for many common record/playback devices have been preconfigured
for optimal performance with the Converge system. Preconfigured devices are listed in the
Device Toolbox and can be placed on the Record and Playback icons.
To select a preconfigured record/playback device
1. Click the Device TToolbox button to display preconfigured
devices.
2. Expand the record/playback category to see a list of record/playback devices (see
figure 3.13).
FIGURE 3.13 Record/playback device list (Converge 560 shown)