ClearOne Converge 590 - Manual (Page 55)

Using the Converge 55
USING THE CONTROLLER
Most phone specific functions, such as dialing a call or adding a phonebook entry, will be
managed from the controller. Phonebook and dialer actions can be done through
Rav-Ware as well. See page 48 for more information.
TO ANSWER A CALL
1. Press on the controller to answer the call. When there is an incoming call, the
phone rings, you will hear the ring tone coming from the speakers.
> Note: Converge can also be set to automatically answer calls. See page 60 to enable
Auto-Answer.
TO MAKE A CALL
1. Press . You will hear a dial tone.
2. Dial the number as you would on a
standard phone. The number appears
on the LCD screen.
> Note: The controller accepts a maxi-
mum of 44 characters. No more than
44 characters can be entered.
TO PRE-DIAL A CALL
1. Dial a phone number. You can press to delete the last digit entered in the
pre-dialing string.
2. Press to send the call.
> Note: The phonebook key will delete the entire dial string if you press it for two
seconds. Pressing and holding the pound (#) key for two seconds will insert a pause
into the dialing string. The duration of the pause is two seconds.
TO END A CALL
1. Press to disconnect the call.
> Note: Converge can also be set to automatically disconnect calls. See page 60 to
enable Auto-Disconnect.
USING THE CONVERGE
18005781234
LCD Screen