Cabletron Systems 6A000/ZX-250 - Manual (Page 97)

SmartCell 6A000/ZX-250 Reference Manual 2-73
Console Commands
Descriptions
Examples
switch_prompt # add lecselan
ELANNumber(0) : 4
ELANName(ELAN004) :
LESAddress(39:00:00:00:00:00:00:00:00:00:14:15:00:00:20:D4:14:15:04:02):
ELANType(802.3) :
MTU(1516) :
TLVSet() :
switch_prompt #
switch_prompt # delete lecselan
ELANNumber(0) : 4
ELAN 4 Configured on LECS
============================================================================
ELAN Number : 4
ELAN Name : ELAN004
LES Address : 39:00:00:00:00:00:00:00:00:00:14:15:00:00:20:D4:14:15:04:02
ELAN Type : 802.3
MTU : 1516
Confirm(y/n)?:y
switch_prompt #
Operator Parameters/Permissions Description
add
lecselan
[ELANNumber]
[ELANName]
[LESAddress] <lesatmaddress>
[ELANType] <elantype>
[MTU] <maxframesize>
[TLVSet] <tlvsetid>
Administrator
Creates a specified ELAN on the LECS. Enter add lecselan
to add an ELAN the long way—with the add buselan, add
leselan, and add lecselan commands. Enter show elan
before this command to display the LES address to be added
to the LECS.
delete
lecselan
[ELANNumber]
Administrator
Removes an existing ELAN from the LECS.
modify
lecselan
[ELANNumber] <elannumber>
[ELANName] <elanname>
[LESAddress] <lesatmaddress>
[ELANType] <elantype>
[MTU] <maxframesize>
[TLVSet] <tlvsetid>
Administrator
Modifies the parameters of a specified ELAN on the LECS by
deleting and then recreating the ELAN. Enter
modify
lecselan if you are moving an ELAN and have a new LES
and BUS ATM address to assign to the ELAN, or if you want
to change the ELAN type. The [ElanNumber] parameter is the
key field for finding the correct ELAN.
show
lecselan
[ELANNumber] <elannumber>
All
Displays a specified ELAN configuration on the LECS.