Cabletron Systems 6A000/ZX-250 - Manual (Page 188)

2-164 SmartCell 6A000/ZX-250 Reference Manual
Console Commands
SARStat
Use SARStat (segmentation and reassembly statistics) to view statistics from the SAR on the CPU port. This is useful
for debugging hardware problems.
Operator
show
Parameters
This command has no input parameters. Just type show sarstat at the switch prompt.
SERVER SVC
X X
Output Parameter Description
[Rcv Pkts] Number of packets received since last up-time or clear.
[RCV Byts] Number of bytes received since last up-time or clear.
[Raw Cell] Number of raw cells received.
[Buf UF] Number of underflow buffers received since last up-time or clear.
[FIFO OR] Number of first in, first out overruns received.
[Max Len] Maximum length of packet.
[Len Err] Number of packet-length errors received.
[Crc Err] Number of packet-length errors received.
[U Abrts] Number of user aborts received since last up-time or clear.
[T1 Err] Number of T1 errors received since last up-time or clear.
[Chnl DVT] Number of channel DVT (delay variation tolerance) indicators since last up-time or clear.
[spur Int] Number of spurious indicators since last up-time or clear.
[Ttl Err] Total errors received since last up-time or clear.