Cabletron Systems 6A000/ZX-250 - Manual (Page 162)

2-138 SmartCell 6A000/ZX-250 Reference Manual
Console Commands
Parameters
Descriptions
Input Parameter Description Field Size/Value Default
[PortNumber] Port number on the switch. ALL, A1...A4,
B1...B4, C1...C4,
D1...D4 ALL
[PortMode] Physical mode type of the port. SONET, SDH SONET
Output Parameter Description
[Port ID] Same as [PortNumber] Input Parameter.
[Frame Type] Same as [PortMode] Input Parameter.
Operator Parameters/Permissions Description
modify
portmode
[PortNumber]<portnumber>
[PortMode]<portmode>
Administrator
Sets the framing mode protocol of the specified port on the
local switch to that of any other switch connected to that port.
However, changing the port transmission mode from SONET
to SDH is not supported.
show
portmode
[PortNumber]<portnumber>
All
Displays the current framing mode protocol of all ports or a
specified port on the switch.