Cabletron Systems 6A000/ZX-250 - Manual (Page 38)

2-14 SmartCell 6A000/ZX-250 Reference Manual
Console Commands
Descriptions
Examples
switch_prompt # add buselan
ELANNumber(0) : 102
ELANName(ELAN102) :
ConnectMethod(SVC) :
ELANType(802.3) :
Multipoint(YES) :
MTU(1516) :
switch_prompt #
switch_prompt # delete buselan
ELANNumber(0) : 3
ELAN Number : 3
ELAN Name : ELAN003
ATM Address : 39:00:00:00:00:00:00:00:20:D4:14:15:00:00:20:D4:14:15:03:02
Confirm(y/n)? : y
switch_prompt #
Operator Parameters/Permissions Description
add buselan [ELANNumber]
[ELANName]
[ConnectMethod]
[ELANType]
[Multipoint]
[MTU]
Administrator
Creates a BUS on a specified ELAN. If the corresponding
LESELAN exists, then the added BUSELAN should have
similar characteristics.
delete
buselan
[ELANNumber]
Administrator
Removes the BUS from a specified ELAN and drops clients
connected to it.
modify
buselan
[ELANNumber]
[ELANName]
[ConnectMethod]
[ELANType]
[Multipoint]
[MTU]
Administrator
Changes the behavior of the BUS parameters for a specified
ELAN. The specified ELAN is then deleted and recreated. If
the corresponding LESELAN exists, then the modified
BUSELAN should have the same characteristics as that
existing LESELAN because their parameters need to match.
show
buselan
[ELANNumber]
All
Displays the BUS parameters for the specified ELAN. Enter
show buselan to confirm that changes you made.