Cabletron Systems 6A000/ZX-250 - Manual (Page 155)

SmartCell 6A000/ZX-250 Reference Manual 2-131
Console Commands
Descriptions
Examples
switch_prompt # modify portautodetect
AutoDetectType(ALL) : sigtype
PortNumber(ALL) : a1
Value(on) : off
switch_prompt #
switch_prompt # show portautodetect
AutoDetectType(ALL) :
PortNumber(ALL) :
PortNumber AutoDetectSigType AutoDetectVpiVciBits
===========================================================================
A1 off on
A2 on on
A3 on on
A4 on on
B1 on on
B2 on on
B3 on on
switch_prompt #
Operator Parameters/Permissions Description
modify
portautodetec
t
[AutoDetectType]
<signalingtype>
[PortNumber] <portnumber>
[Value] <value>
Administrator
Modifies the flag settings that control auto-detection of
signaling type and VPI and VCI bits. This function can be
enabled or disabled for each port, but signaling type and VPI
and VCI bits are default enabled. You should disable
auto-detection if the device at the other end does not support
auto-detection (for example, if the other device is a PVC
switch.)
show
portautodetec
t
[AutoDetectType]
<signalingtype>
[PortNumber] <portnumber>
All
Displays the current flag settings that control the
auto-detection of signaling type and VPI and VCI bits.