Cabletron Systems 6A000/ZX-250 - Manual (Page 202)

2-178 SmartCell 6A000/ZX-250 Reference Manual
Console Commands
[ConnType] (< /s >) Either PMP to PTP connection type. PMP, PTP
[LowPort] (< /s >)
[LowVPI] (< /s >)
[LowVCI] (< /s >)
[HighPort] (< /s >)
[HighVPI] (< /s >)
[HighVCI] (< /s >)
These parameters are available in the show svc /s option, as
well as those listed above. See Input Parameter table above
for descriptions. See Input Parameter
table
[AdminStatus] (< /s >) Status of the VC. It can be modified by the Administrator. UP, DOWN
[L2HOpStatus] (< /d >) Status of the forward connection. Status is from the
low-to-high VCL (virtual channel link), the connection
between host and switch. UP, DOWN
[H2LOpStatus] (< /d >) Status of the backward connections. Status is from the
high-to-low VCL, the connection between host at switch. UP, DOWN
[L2HLastChange(Time in
1/100 second since last
reboot)] (<
/d >)
Time stamp of the last change in operation status of the
forward traffic connection. 1/100 second
[H2LLastChange)(Time in
1/100 second since last
reboot)] (<
/d >)
Time stamp of the last changed in operation status of the
backward connections. 1/100 second
[FwdTrafficType] (< /d >) Traffic type of this forward cross-connect. CBR, NRTVBR,
RTVBR, UBR
[FwdBandwidthAllocated
in Kb/s] (<
/d >)
Forward bandwidth allocated to this cross-connect, as
calculated by CAC. Kb/s/
0-622000
[FwdPriorityQueue]
(<
/d >)
Forward priority of the internal queue of this cross-connect,
as calculated by CAC. HIGH,
MEDIUM-HIGH,
MEDIUM-LOW, LOW
[FwdEarlyPacketDiscard
(for Lower...)] (<
/d >)
Forward EPD of this cross-connect, as calculated by CAC
for the low threshold of congestion. Enabled, Disabled
[FwdEarlyPacketDiscard
(for Higher...)] (<
/d >)
Forward EPD of this cross-connect, as calculated by CAC
for the high threshold of congestion. Enabled, Disabled
Output Parameter Description Value/Field Size