Cabletron Systems 6A000/ZX-250 - Manual (Page 172)

2-148 SmartCell 6A000/ZX-250 Reference Manual
Console Commands
PVC
Use PVC (permanent virtual circuit) to manage PVCs on specific ports configured on the switch.
Operators
add, delete, activate, deactivate, show
Parameters
SERVER SVC
X X
Input Parameter Description Value/Field Size Default
[ConnType] Connection type for PMP (point-to-multipoint)
or PTP (point-to-point). PMP, PTP PTP
[LowPort] Port receiving the backward traffic flow of the
high/low pair. A1...A4, B1...B3,
C1...C4, D1... D4 A1
[LowVPI] Low VPI (virtual path identifier) number. The
range is modifiable by setting [MaxVpibits] at
modify portconfig.
0-maximum 0
[LowVCI] Low VCI (virtual circuit identifier) number.
Modifiable by setting [MaxVcibits] at
modify
portconfig.
0-maximum 33
[HighPort] Port sending the forward traffic flow of the
high/low pair. A1...A4, B1...B3,
C1...C4, D1... D4 A1
[HighVPI] High VPI number. Modifiable by setting
[MaxVpibits] at
modify portconfig .
0-maximum 0
[HighVCI] High VCI number. Modifiable by setting
[MaxVcibits] at
modify portconfig.
0-maximum 34
[FwdTrafficDescIndex] Index of the traffic descriptor for the forward
(low-to-high) connection of VCs (virtual
circuits). Create traffic descriptor prior to
creating this PVC. 1, 2, 3, 4.../
1-20 1