Cabletron Systems 6A000/ZX-250 - Manual (Page 48)

2-24 SmartCell 6A000/ZX-250 Reference Manual
Console Commands
Client
Use Client to determine all or local LANE (LAN emulation) and IP/ATM (IP over ATM) clients on the switch.
Operators
delete, restart, show
Parameters
In the Output Parameter table below, () appears next to parameters that are available only through the show
client /d (detailed) command.
SERVER SVC
X X
Input Parameter Description Value/Field Size Default
[ClientNumber] Number of the local client. 0-127 ALL
Output Parameter Description
[Type] Type of client.
[IP Address] IP address of client.
[Server Type] Specifies what server type the client is on.
[Server Conn] Type of connection the client has with the server.
[Status] Current status of the client.
[Client State] () Status of where the client is in the process of making a connection.
[Client Address] ( ) ATM address of the client.
[LAN Name] () ELAN name for this client.
[LECS Addr Source]
()
ILMI, well-known address, or LECS address.