Cabletron Systems 6A000/ZX-250 - Manual (Page 169)

SmartCell 6A000/ZX-250 Reference Manual 2-145
Console Commands
Privilege
Use Privilege to manage the privilege level of the current user.
Operators
show, enable, disable
Parameter
Descriptions
SERVER SVC
X X
Input Parameter Description Value/Field Size Default
[Password] Current password for that privilege level. 5-8 characters n/a
Operator Parameters/Permissions Description
show
privilege
All Displays the privilege level of the current user. The two
available levels are Administrator and Read Only.
enable [Password] <currentpassword>
All
Raises the privilege level. There are two levels in the
switch—Read-Only and Administrator. If you are logged on
with a Read-Only privilege status and then issue this
command, the switch prompts you for the Administrator
[Password] before allowing access to Administrator
commands.
disable Administrator Lowers the privilege level from Administrator to Read Only.
No password is required.