Cabletron Systems 6A000/ZX-250 - Manual (Page 139)

SmartCell 6A000/ZX-250 Reference Manual 2-115
Console Commands
show
logtrace
All Displays the parameters of the currently configured log
trace. Logged messages can also generate alarms,
depending on how the log alarm mask is configured.
Setting the log trace opens a TCP port through which
other log trace clients can connect and receive
messages. Filtering the messages can be done either on
the switch or from the external log trace clients.
Filtering through external log trace clients can be done
using module, submodule, message, parameter type,
parameter values, or flags. See the Software Modules
Table on page 2-110 and Software SubModules Table
on page 2-111 for further details.
Operator Parameters/Permissions Description