Cabletron Systems 6A000/ZX-250 - Manual (Page 131)

SmartCell 6A000/ZX-250 Reference Manual 2-107
Console Commands
Descriptions
Examples
switch_prompt # modify logbuffer
LogBufferSize(10240): 7000
switch_prompt #
switch_prompt # show logbuffer
Index(ALL) :
----------------------------------------------------
Num Mod SubMod T(h:m:s:ms) Msg
----------------------------------------------------
0 HW LINK 000:00:36:387 14910: Port A1 (1) DOWN
1 HW LINK 000:00:36:413 14910: Port A2 (2) DOWN
2 HW LINK 000:00:36:439 14910: Port A3 (3) DOWN
3 HW LINK 000:00:36:465 14910: Port A4 (4) DOWN
4 LES BUSS 000:00:36:566 26955:26955
switch_prompt #
switch_prompt # clear logbuffer
Confirm(y/n)?:y
switch_prompt #
Operator Parameters/Permissions Description
modify
logbuffer
[Log Buffer Size]
<logbuffersize>
Administrator
Modifies the size of the log buffer. When full, the circular log
buffer wraps around and begins writing over the oldest log
messages. The log buffer size is an allocation of switch
memory. Setting this value too high constrains available
memory.
show
logbuffer
[Index] <indexnumber>
Administrator
Displays all of the alarms in the log message buffer or a
particular alarm if you specify an index number.
clear
logbuffer
Administrator Clears all the messages contained in the log message buffer.