Cabletron Systems 6A000/ZX-250 - Manual (Page 239)

SmartCell 6A000/ZX-250 Reference Manual 3-7
Boot Load Commands
go
Use the go command to exit the boot load prompt and run switch software (with or without POST).
Example
=>go s
Verifying Checksum of Secondary Flash...
Host Name:
Attaching network interface ei0... done.
Attaching network interface lo0... done.
0xe05764e0 (tRootTask): flashFsLib: Initialized
Initializing Flash File-System
Initializing System
Initializing Hardware
Initializing Alarms, Logging and Tracing
Initializing Signalling (please wait)
Initializing ILMI
Initializing LANE Servers
NOTICE - 'ZLESSRV' ***** LES started *****
Initializing LANE & IP/ATM Client
Initializing Watchdog Timer
SmartCell ZX Command Console
SmartCell ZX Version 1.2 (c) Cabletron Systems Inc.
password:
Parameter Explanation
s Bypass POST and go directly to switch software.
p Run POST, and then run switch software.
none Same as s ; bypass POST and go directly to switch software.