Cabletron Systems 6A000/ZX-250 - Manual (Page 16)

1-6 SmartCell 6A000/ZX-250 Reference Manual
Introduction
Operators
Parameters appear in the parameter tables in the same order and spelling as the switch shows them.
Most switch attribute descriptions show two tables—Input Parameter and Output Parameter. If the parameter has
already been described in the input parameter table, no reference to it appears in the output parameter table. The output
parameter table contains only parameters that have not been described in the input parameter table or that are written
very differently on output despite having the same meaning.
passwd Changes passwords
reboot Reboots the switch
restart Restarts LANE and IP-ATM clients
restore Restores switch configuration
setup Sets up switch
show (display) Shows properties of an object
OPERATOR ACTION
shutdown Shuts down switch
start Starts server
stop Stops server
update Upgrades firmware
Table 1-2 Operator Table Explanation
Parameter Description Value/Field Size Default
[Input or Output Field]
() What the switch puts on your screen (either as input
or output) relating to the console command you are
executing. The [InputParameter] is an entry you
need to complete if you do not accept the default.
The [OutputParameter] shows information from the
switch. Requires no input. This example is available
only within the detailed information table. Unit of measurement/
Maximum field size
for input entry. Option
offered by
the switch.
Table 1-1 List of Operators (Continued)
Operator Action