Cabletron Systems 6A000/ZX-250 - Manual (Page 91)

SmartCell 6A000/ZX-250 Reference Manual 2-67
Console Commands
Description
Examples
switch_prompt # add laneclient
ClientNumber(0) :100
LanName(ELAN100):
ServerType(LECS):
ServerAddress() :39:00:00:00:00:00:11:11:11:11:11:11:11:00:11:22:22:44:55:01
IPAddress() :101.1.1.100
NetMask(255.0.0.0):
MTU(1516) :
switch_prompt #
switch_prompt # modify laneclient
ClientNumber(0) : 100
LanName(ELAN100): New100
ServerType(LECS):
ServerAddress() :39:00:00:00:00:00:11:11:11:11:11:11:11:00:11:22:22:44:55:01
IPAddress(101.1.1.100):
NetMask(255.0.0.0):
MTU(1516) :
switch_prompt #
Operator Parameters/Permissions Description
add
laneclient
[ClientNumber]
[LanName]
[ServerType]
[ServerAddress]
[IPAddress]
[NetMask]
[MTU]
Administrator
Creates a new LANE (LAN emulation) client to the switch.
Add a LANE client if you want to access the switch command
console using LANE.
modify
laneclient
[ClientNumber]
[LanName]
[ServerType]
[ServerAddress]
[IPAddress]
[NetMask]
[MTU]
Administrator
Changes an existing LANE client on the switch.
show client [ClientNumber]
All
Displays all or specified clients on the switch. Enter show
client to establish the different client types on the switch. See
“Client” for further details.