Cabletron Systems 6A000/ZX-250 - Manual (Page 107)

SmartCell 6A000/ZX-250 Reference Manual 2-83
Console Commands
LECSTLVSet
Use LECSTLVSet (LAN emulation configuration server type, length, and value set) to manipulate TLV parameters on
the LECS. A TLV set is a collection of TLV parameters associated with an ELAN (emulated LAN).
Operators
add, delete, modify, show
Parameters
SERVER SVC
X
Parameter Description Value/Field Size Default
[TLVSetNumber] Number that identifies the set of TLV
parameters on the LECS. 1-32767 1
[ControlTimeout] Time-out period used for timing out most
request/response control-frame
interactions. seconds/10-300 n/a
[MaxUnknownFrameCount] Total counter frames a LANE client will
send to the LECS for a given unicast LAN
destination. 1-10 n/a
[MaxUnknownFrameTime] Total time frames a LANE client will send
the LECS for a given unicast LAN
destination. seconds/1-160 n/a
[VCCTimeout] Time-out period for releasing a data direct
VCC on an LEC if it has not been used to
transmit or receive any data. seconds/0-65535 n/a
[MaxRetryCount] Maximum number of times a LEC should
try for a given LAN destination. 0-2 n/a
[ArpAgingTime] Maximum time that a LEC maintains an
entry in its cache in the absence of updates. seconds/10-300 n/a
[ForwardDelay] Maximum time a LEC will maintain an
entry for a non-local MAC address in its
cache in the absence of updates. seconds/4--30 n/a