Cabletron Systems 6A000/ZX-250 - Manual (Page 129)

SmartCell 6A000/ZX-250 Reference Manual 2-105
Console Commands
Descriptions
Examples
switch_prompt # modify logalarmmask
Emergency(n):y
Alert(n) :
Critical(n) :
Error(n) :
Warning(n) :y
Notice(n) :
Info(n) :
Debug(n) :
Trace(n) :
ALARM(n) :
switch_prompt #
switch_prompt # show logalarmmask
SwitchNameFlags generating alarms for following log types
-----------------------------------------------
Emergency Flag : ON
Alert Flag : OFF
Critical Flag : OFF
Error Flag : OFF
Warning Flag : ON
Notice Flag : OFF
Info Flag : OFF
Debug Flag : OFF
Trace Flag : OFF
Alarm Flag : OFF
switch_prompt #
Operator Parameters/Permissions Description
modify
logalarmmask
Emergency]
[Alert]
[Critical]
[Error]
[Warning]
[Notice]
[Info]
[Debug]
[Trace]
[ALARM]
Administrator
Controls which log messages are accepted into the alarm
message buffer. The log alarm mask enables you to specify
which alarms you want in the alarm message buffer by typing
y or n at the relevant parameter field.
show
logalarmmask All Displays the current settings of the flags within the alarm
message buffer. If no flags are on, all log messages are
accepted into the alarm message buffer. If one flag is on, only
those log messages that have the flag set are accepted into the
alarm message buffer. You can “ell if a particular masking
flag is active or not by whether “ON” or “OFF” is visible next
to it.