Cabletron Systems 6A000/ZX-250 - Manual (Page 30)

2-6 SmartCell 6A000/ZX-250 Reference Manual
Console Commands
AlarmConfig
Use AlarmConfig (alarm configuration) to determine alarm message buffer file configuration.
Operators
add, modify, show
Parameters
SERVER SVC
X X
Input Parameter Description Value/Field Size Default
[AlarmNumFiles] Number of alarm files (within the flash file
system) to be used for saving alarm messages. 1, 2, 3, 4.../
1-32 32
[StartFileNum] Offset to the starting file for alarm messages in
relation to number of alarm message files
specified by [
AlarmNumFiles].
0, 1, 2, 3, 4.../
n/a 0
[NumFilesUsed] Number of files currently used within the alarm
message buffer (cannot exceed number of files to
store alarms). 0, 1, 2, 3, 4.../
n/a 0
[NumAlarmsPerFile] Number of alarm messages that can be stored per
file within the alarm message buffer. Using a
smaller value results in less file system rewriting
but increases the space wasted per entry, as each
file has fixed overhead. 0, 1, 2, 3, 4.../
n/a 8
Output Parameter Description Default
[Alarm directory] Name of the directory within the flash file system that contains the alarm
message buffer. ALARM