Cabletron Systems 6A000/ZX-250 - Manual (Page 64)

2-40 SmartCell 6A000/ZX-250 Reference Manual
Console Commands
Description
Example
switch_prompt # clear config
You should backup your configuration using the "backup switch" command, in case
you want to recover this configuration
Continuing will permanently erase the current switch configuration,
and requires a switch reboot.
Are you sure this is what you want to do?
Confirm(y/n)?:y
Configuration cleared.
Rebooting is required to ensure correct operation,
Do you want to reboot now?
Confirm(y/n)?:y
Operator Parameters/Permissions Description
clear
config
Administrator Erases all switch configuration information, including
Ethernet interface address, VLAN and ELAN configurations,
signaling configuration, port configurations, and so on.