Cabletron Systems 6A000/ZX-250 - Manual (Page 201)

SmartCell 6A000/ZX-250 Reference Manual 2-177
Console Commands
SVC
Use SVC (switched virtual circuit) to see the SVCs created on the switch.
Operator
show
Parameters
In the Output Parameter table below, (< /d >) appears next to parameters that are available only through the show svc
/d (detailed) command. When (< /s >) (summarized) appears next to a parameter, it means that this parameter is
displayed in both the summarized and the detailed tables.
SERVER SVC
X X
Input Parameter Description Value/Field Size Default
[PortNumber] Port number on the switch. ALL, A1...A4,
B1...B3, C1...C4,
D1...D4 ALL
[CrossConnId] Chronological sequential index marker of the
circuits. All point-to-multipoint (PMP)
cross-connect IDs of the same low port have the
same cross-connect ID. 1,2,3,4.../
n/a
Output Parameter Description Value/Field Size
[ConnId] (< /s >) Same as [CrossConnId] input parameter 1,2,3,4.../
n/a
[Conn SubId] (< /s >) Id of the leaf in PMP connection. If you do not specify a sub
ID, all leaves of a PMP connection identified by the
cross-connect ID will be deleted. 1,2,3,4.../
n/a
[Traffic Type] (< /s >) Traffic type of the descriptor. CBR, NRTVBR,
RTVBR, UBR