Cabletron Systems 6A000/ZX-250 - Manual (Page 199)

SmartCell 6A000/ZX-250 Reference Manual 2-175
Console Commands
SSCOPConfig
Use SSCOPConfig (service-specific connection-oriented protocol configuration) to view timers and other parameter
values.
Operator
show
Parameters
SERVER SVC
X X
Parameter Description Value/Field Size Default
[Port#] Port number on the switch. ALL, A1...A4, B1...B3,
C1...C4, D1...D4 ALL
[MaxPD] Number of SD (switching delay) PDUs (protocol data
unit) after which a poll PDU is generated. 5-20 10
[MaxCC] Number of begin PDUs sent during line establishment. 4-10 4
[PollTm] Time between generation of PDUs. m/seconds/
100-200 200
[KpAliveTm] Controls poll exchange rate in the absence of SD PDU
traffic. m/seconds/
1000-2000/ 1000
[NoRespTm] Maximum time within which a poll has to be
acknowledged by a PDU. m/seconds/
10000-15000 10000
[CCTm] Rate at which begin and end PDUs are generated. m/seconds/
1000-2000 1000
[TxWindowSz] Setting of transmit direction window size. 32-256 256
[RxWindowSz] Setting of receive window size. 32-256 256