Clientstat, Operator, Parameters – Cabletron Systems 6A000/ZX-250 User Manual
Page 54
2-30 SmartCell 6A000/ZX-250 Reference Manual
Console Commands
ClientStat
Use ClientStat (client statistics) to view LANE (LAN emulation) or IP/ATM (IP over ATM) client statistics.
Operator
show
Parameters
In the Output Parameter table below,
()
appears next to parameters that are available only through the
show
clientstat /d
(detailed) command. The (IP/ATM) and (LANE) client indicators after particular parameters indicate
that these parameters will display only if that particular client type is active.
SERVER
SVC
X
X
Input Parameter
Description
Value/Field Size
Default
[ClientNumber]
Number of the client.
0-127
ALL
Output Parameter
Description
[Client Type]
Type of client.
[RxPkts]
Number of packets received.
[TxPkts]
Number of packets transmitted.
[RxOctets]
Number of octets (bytes) received.
[TxOctets]
Number of octets (bytes) transmitted.
[Bytes Received]
()
Number of bytes received.
[Unicast Packets]
()
Number of unicast packets received or transmitted.
[Multicast Packets]
()
Interface maximum transfer unit to assign to the local interface associated
with this client.