Switchtrafficcongestion, Operators, Parameters – Cabletron Systems 6A000/ZX-250 User Manual
Page 213
SmartCell 6A000/ZX-250 Reference Manual 2-189
Console Commands
SwitchTrafficCongestion
Use SwitchTrafficCongestion to manage global switch traffic congestion thresholds on the switch.
Operators
modify, show
Parameters
SERVER
SVC
X
X
Parameter
Description
Value/Field Size
Default
[Queue # EFCI Threshold]
Threshold used to trigger EFCI
(explicit forward congestion
indicator) cell marking in the
switch for the specified priority
queue (where “#” is 1, 2, 3, or 4).
1, 2, 3, 4.../
n/a
16383
[Low EPD Watermark/Threshold]
Threshold (in cells) used by the
switch to trigger low EPD (early
packet discard), EFCI, and
backward RM (resource
management) cell marking.
1, 2, 3, 4.../
n/a
5461
[High EPD Watermark/Threshold]
Threshold (in cells) the switch
uses to trigger high EPD.
0-16951
7551
[Switch Discard Threshold]
Threshold the switch uses to
discard cells when the memory
buffer is full.
1, 2, 3, 4.../
n/a
n/a
[RM Cell Marking Enable]
Indicates whether RM cell
marking is enabled across the
switch.
OFF (disable) or
ON (enable)
ON
[EFCI Marking Enable]
Indicates whether the EFCI cell is
enabled on the switch.
OFF (disable) or
ON (enable)
ON