beautypg.com

Chpi, Example – Cabletron Systems 6A000/ZX-250 User Manual

Page 235

background image

SmartCell 6A000/ZX-250 Reference Manual 3-3

Boot Load Commands

chpi

Use

chpi

to set one of the two boot load software images as the default. Unless otherwise specified within the initial

reboot countdown, the default boot load software image is the image that is loaded into DRAM and executed.

Example

Set the boot load software image in boot PROM location 1 as the default image.

=>chpi 1

Modifying Default value for Boot Load Software,

please wait...

New default Boot Load Software value programmed

successfully.

New Default Boot Load Software value: 1

=>

Parameter

Explanation

0

Set boot load software image stored in area 0 of the boot
PROM as the default image.

1

Set boot load software image stored in area 1 of the boot
PROM as the default image.

See also other documents in the category Cabletron Systems Hardware: