Cabletron Systems 6A000/ZX-250 - Manual (Page 90)

2-66 SmartCell 6A000/ZX-250 Reference Manual
Console Commands
LANEClient
Use LANEClient (local area network emulation client) to allow inband management of LANE clients on the switch.
Operators
add, modify, (show client)
Parameters
SERVER SVC
X X
Input Parameter Description Value/Field Size Default
[ClientNumber] Number of the client. 0-127 ALL
[LanName] Name of the ELAN for this client to join. Up to 32 characters ELAN000
[ServerType] Type of LANE server. LECS, LES LECS
[ServerAddress] ATM Address of the LANE server or
LECS. If at a local server, enter the switch
ATM address. 13-20 byte hex-based/
Up to 59 characters Registered LECS
address
[IPAddress] IP address of the client. dot decimal/
7-15 characters
NONE
[NetMask] IP netmask of the client. Defaults to the
appropriate netmask, based on the class of
the IP address. Calculated from the first
two high bits of the IP address, so it is either
255.0.0.0, 255.255.0.0, or 255.255.255.0.
Must be specified only if IP subnets are
being used. dot decimal/
7-15 characters 255.0.0.0,
255.255.0.0, or
255.255.255.0.
[MTU] Maximum transfer unit for this client. 1516, 9234, NONE 1516