Cabletron Systems 6A000/ZX-250 - Manual (Page 181)

SmartCell 6A000/ZX-250 Reference Manual 2-157
Console Commands
PVCByID
Use PVCByID (permanent virtual circuit by identification number) to manage cross-connect based PVCs on a
cross-connect ID or sub ID.
Operators
activate, deactivate, delete
Parameters
Descriptions
SERVER SVC
X X
Input Parameter Description Value/Field Size Default
[CrossConnId] Identifies the PVC on the switch. Chronological
sequential index marker of the circuits. 0, 1, 2, 3, 4...
/n/a 0
[CrossConnSubId] ID of the leaf in PMP connection. 0, 1, 2, 3, 4.../
n/a 0
Operator Parameters/Permissions Description
activate
pvcbyid
[CrossConnId] <crossconnid>
[CrossConnSubId]
<crossconnsubid>
Administrator
Activates a PVC by its unique identifier. Can be used instead
of
activate pvc and requires fewer input parameters if the
PVC had been created using create pvc . If the
CrossConnSubId is “0”, then all the PVCs with same
CrossConnId are deactivated.
deactivate
pvcbyid
[CrossConnId] <crossconnid>
[CrossConnSubId]
<crossconnsubid>
Administrator
Deactivates a PVC by its unique identifier. Can be used
instead of
deactivate pvc and requires fewer input
parameters if the PVC had been created using create pvc . If
the CrossConnSubId is “0”, then all the PVCs with same
CrossConnId are deactivated.