Cabletron Systems 6A000/ZX-250 - Manual (Page 61)

SmartCell 6A000/ZX-250 Reference Manual 2-37
Console Commands
Community
Use Community to group NMS (network management system) hosts by privilege level. Hosts are collectively called
communities, and their privilege level determines the type of information access permitted by the switch. The switch
provides access to the information only if the request comes from a community configured with the necessary
privileges.
Operators
add, delete, show
Parameters
Do not modify the ILMI community. The ILMI protocol will not work correctly
if modified.
SERVER SVC
X X
Input Parameter Description Value/Field Size Default
[Name] SNMP community name. Needs to be
defined on the switch to access SNMP. 64 characters ILMI, public,
and zeitnet
[IPAddr] IP address of the host or hosts that can use
this community name. Entering 0.0.0.0
allows access by any host. dot decimal/
7-15 characters 0.0.0.0
[Privilege] Privileges associated with this community. read, write, read-write/
n/a
ILMI--write
public--read
zeitnet--write
Output Parameter Description
[Community Name] Same as [Name] Input Parameter.